The GR-CPCI-GR740 development board has been designed to support the development and fast prototyping of systems based on the GR740 quad-core 32-bit fault-tolerant LEON4FT SPARC V8 processor.

The GR-CPCI-GR740 Development Board comprises a custom-designed PCB in a 6U Compact PCI format, making the board suitable for stand-alone bench-top development, or if required, to be mounted in a 6U CPCI Rack, or in a bench-top enclosure. The principle interfaces and functions are accessible on the front and back edges of the board, and secondary interfaces via headers on the board. The  GR-CPCI-GR740 Development Board comes as standard with a dedicated accessory board which provides access to additional I/O interfaces.

Features

• GR740 quad-core 32-bit fault-tolerant LEON4FT SPARC V8 processor
• cPCI interface (32 bit) configurable with jumpers for Host or Peripheral operation
• PCI arbiter implemented in separate FPGA
• On-board memory:
  • SDRAM SODIMM module - Delivered with two 256 MiB modules that provide a total 256 MiB of accessible data RAM plus ECC check bits.
  • Parallel Boot Flash 64 Mbit (16 bit wide x 4M or 8 bit wide x 8M)
  • Additional memory via memory expansion connector
• Power, reset, clock and auxiliary circuits
• Interfaces at front edge of board:
  • Dual RJ45 10/100/1000 Mbit GMII/MII Ethernet interface (KSZ9021GN)
  • 8 port SpaceWire interface (8x MDM9S)
  • SpaceWire debug communications link (MDM9S)
  • 16-bit General purpose I/O (34 pin 0.1" ribbon cable style connector)
  • FTDI Serial to USB interface (FT4232HL with USB-Mini-AB)
  • LED indicators connected to GPIO signals
  • DIP switch for bootstrap and PLL interface configuration
  • Push button switch for reset and toggle switch (on/off) for DSU break
• Interfaces at back edge of board:
  • Compact PCI interface (32-bit), configurable for Host or Peripheral slot
  • Input power connector: 5V nominal
• Interfaces on-board:
  
  • SPI  interface on pin headers
  • JTAG Debug interface
  • 4-pin IDE style power connector
  • Assorted jumpers and Test Points for configuration and test of the board
• To accommodate the optional/alternative I/O interfaces the accompanying accessory board provides
  
  • Dual MIL-1553 Interface (Transceiver/Transformer and D-sub 9 Male connector)
  • Dual CAN Interface (CAN Transceivers and two D-sub 9 Male connectors)
  • Two Serial UART (RS232 transceivers and two D-sub 9 female connectors)
  • SPI interface (available via 10 pin header)

GR-CPCI-GR740 Development Board

GR-CPCI-GR740 Development Board and GR-ACC-GR740 Interface board

Box integrating GR-CPCI-GR740 and GR-ACC-GR740 (front panel)

Box integrating GR-CPCI-GR740 and GR-ACC-GR740 (back panel)

Document

File

GR740 device information

GR740 product page

GR-CPCI-GR740 User's Manual

GR-CPCI-GR740-UM.pdf (May 2019)

GR-CPCI-GR740 Quick Start Guide

qsg_740.pdf (August 2023)

GR-CPCI-GR740 Quick Start Guide Board Package

gr-cpci-gr740-bp.zip (May 2017)

GR-CPCI-GR740 Documentation Archive (password protected)

GR740_20190213.zip (February 2019)

GR-CPCI-GR740 Letter of Volatility

GR-CPCI-GR740-LOV (September 2023)

• Power Supply, 100-240V AC to 5V DC, plug in type
• USB-A to MiniAB cable
• Ethernet Patch Cable
• Set of 4 PCI Bridge PCB's (GR-CPCI-GR740 only)
• Set of 2 brackets to mount Interface board (GR-CPCI-GR740 only)