Boards | Description |
GR-CPCI-GR740 | GR740 Quad-core LEON4FT Development board |
GR-VPX-GR740 | GR740 Quad-core LEON4FT Development board - OpenVPX |
GR712RC-BOARD | GR712RC Dual-core LEON3FT Development board |
GR716-MINI | GR716 software evaluation board |
GR716-BOARD | GR716 hardware engineering board |
GR-CPCI-GR716-DEV | GR716 interface development board |
GR718B-BOARD | GR718B SpaceWire Router Development board |
GR-CPCIS-XCKU | Xilinx Kintex UltraScale FPGA Development board - CPCI-S.1 |
GR-VPX-XCKU060 | Xilinx Kintex UltraScale FPGA Development board - OpenVPX |
GR-CPCI-XC7K | Xilinx Kintex 7, Compact PCI FPGA Development board |
GR-CPCI-XC5V | Xilinx Virtex 5, Compact PCI FPGA Development board |
GR-CPCI-XC4V | Xilinx Virtex 4, XC4VLX100 FPGA Compact PCI format plug in board, especially developed for LEON development, with on-board SO-DIMM, FLASH, Ethernet, DSU UART, user and memory expansion connectors |
The application note on mezzanine connectors describes the pin numbering used for the AMP connectors. | |
Mezzanine Boards | Description |
GR-CPCI-SER2-SPW4 | Mezzanine board which provides two RS232 serial interfaces and four LVDS interfaces with SpaceWire connections. |
GR-CPCI-SRAM-8M | Mezzanine board for GR-CPCI board, providing 8Mbyte SRAM. This allows SRAM to be used in addition to, or instead of SDRAM. |
GR-CPCI-TEST | Mezzanine board for GR-CPCI board, connecting to user expansion connectors. This provides standard 0.1" header connectors for easy hook-up to the general purpose I/O signals or for logic analyser/test connections. |
Accessories for PCI Boards | |
GR-PCI-CAN | I/O expansion connector and providing two CAN bus interfaces |
GR-PCI-RS232 | I/O expansion board providing two RS232 interfaces |
GR-PCI-RS422 | I/O expansion board providing two RS422 interfaces |
GR-PCI-LVDS | I/O expansion board providing two LVDS interfaces |
Accessories for Compact PCI Boards | |
GR-CPCI-RS232 | Same as GR-PCI-RS232, but with compact PCI front plate for installation in a Compact PCI rack |
GR-CPCI-RS422 | Same as GR-PCI-RS422, but with compact PCI front plate for installation in a Compact PCI rack |
GR-CPCI-LVDS | Same as GR-PCI-LVDS, but with compact PCI front plate for installation in a Compact PCI rack |
GR-CPCI-SRAM-8M | Mezzanine board for GR-CPCI board, providing 8Mbyte SRAM. This allows SRAM to be used in addition to, or instead of SDRAM. |
GR-CPCI-TEST | Mezzanine board for GR-CPCI board, connecting to user expansion connectors. This provides standard 0.1" header connectors for easy hook-up to the general purpose I/O signals or for logic analyser/test connections |
The boards are shipped with a CD containing: user's manual, complete schematics, necessary .ucf files for Xilinx place&route tools, BCC cross-compiler system, GRMON evaluation version, LEON3 VHDL model. A pre-synthesized LEON netlist is programmed in the FPGA configuration prom, using a standard LEON configuration with DSU, PCI and Ethernet. Custom configurations can be shipped on request.
Note: Pricing and availability can vary due to availability of FPGA components
For formal quotes, questions on availability, pricing or ordering, please contact us at:
Tel: +46 (0)31 7758650
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. |